• Login
    Buscar 
    •   AEIPRO Principal
    • Buscar
    •   AEIPRO Principal
    • Buscar
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Buscar

    Mostrar filtros avanzadosOcultar filttos avanzados

    Filtros

    Use filtros para refinar sus resultados.

    Mostrando ítems 11-20 de 32

    • Opciones de clasificación:
    • Relevancia
    • Título Asc
    • Título Desc
    • Fecha Asc
    • Fecha Desc
    • Resultados por página:
    • 5
    • 10
    • 20
    • 40
    • 60
    • 80
    • 100
    Thumbnail

    FLUIDIZACIÓN DE ARENA FINA HÚMEDAD EN UN SPOUTED BED CÓNICO 

    Pablos Castro, Aitor; Vicente Peñalosa, Jorge; Izquierdo Navarro , Javier; Aguado Zárraga, Roberto; Olazar Aurrecoechea, Martín (2017)
    Fluidization of wet solids has been studied in a conical spouted bed with open-sided draft- tube and confinement system, being the design parameters the optimal obtained in a previous hydrodynamic study. This research is ...
    Thumbnail

    DISEÑO DE UN SISTEMA INTEGRAL PARA LA LIMPIEZA E INSPECCIÓN DE FRESAS 

    Cavas, F.; Parras, D.; Pérez, J.C.; Cañavate, F.J.F.; Fernández-Pacheco, D.G. (2017)
    Current factories dedicated to food products, and especially those that handle agricultural products, need a system to remove a great amount of unwanted elements (sand, roots, insects, etc.), as well as products in bad ...
    Thumbnail

    APROXIMACIÓN METODOLÓGICA A LA OPTIMIZACIÓN MULTIOBJETIVO DE PIEZAS OBTENIDAS POR IMPRESIÓN 3D 

    García Domínguez, Amabel; Claver Gil, Juan; Sebastián Pérez, Miguel Ángel (2017)
    This work exposes the main aspects considered during the development of the proposed methodology for the optimization of pieces by 3D printing. From the initial stage of software selection to the final results obtained by ...
    Thumbnail

    DISEÑO ORIENTADO A LA PRODUCCIÓN Y SU APLICACIÓN EN EL PROYECTO DE CONSTRUCCIÓN DE UN BUQUE TIPO FERRY 

    Mascaraque-Ramírez, Carlos; Para-González, Lorena; Marco-Jornet, Paloma (2017)
    In an increasingly and globalized sector as the new constructions naval one, the search of reductions in execution terms and production costs becomes essential. With this aim, the vessel project should be analyzed globally, ...
    Thumbnail

    DISEÑO Y OPTIMIZACIÓN DE UN IMPLANTE DENTAL 

    López Navarro, Ferran; Ros Fàbrega, Robert; Castañeda Fernández, David; Reyes Pozo, Guillermo; Puigoriol Forcada, Josep Maria (2017)
    The basis of this process is to design a dental implant and different associated prosthetic components, with the principal objective of creating an innovative dental implant model which allows a better final integration ...
    Thumbnail

    ANÁLISIS DEL VALOR PARA LA OPTIMIZACIÓN DEL PROCESO DE SELECCIÓN DE CÓDIGOS DE FABRICACIÓN EN LA INDUSTRIA NUCLEAR 

    Rodríguez-Prieto, Álvaro; Camacho, Ana M.; Sebastián, Miguel A. (2017)
    Safety is the most important aspect to consider in the design and construction stages of a nuclear power plant. Thus, the reactor vessel is probably the most important element for safety, since it houses the fuel and must ...
    Thumbnail

    ACTITUD DEL CONSUMIDOR HACIA LA REPARACIÓN Y LA COMPRA DE SEGUNDA MANO DE ELECTRÓNICA DE CONSUMO 

    Bovea Edo, Mª Dolores; Ibáñez-Forés, Valeria; Pérez-Belis, Victoria; Braulio-Gonzalo, Marta; Juan Verdoy, Pablo (2017)
    This study present the results from a survey aimed to identify current habits and practices towards the repair and second-hand purchase of small consumer electronics which are commonly used in households. To this end, a ...
    Thumbnail

    OTIMIZAÇÃO DE UMA PISCINA NA SUA INTEGRAÇÃO ENERGÉTICO-AMBIENTAL COM O EDIFÍCIO 

    Cunha, Paulo; Martins, Luís; Rodrigues De Seabra, Eurico Augusto; Teixeira, José Carlos (2017)
    The present article describes an energy system based on a heat pump that can manage the heat energy of the water pool, where the pool water and the house are used as thermal sources (cold source or hot source). The heat ...
    Thumbnail

    DISEÑO DE UNA MESA AUXILIAR DE ENFERMERÍA MEDIANTE HERRAMIENTAS DE MODELADO GRÁFICO 

    Cavas, F.; Parras, D.; Abellán, R.; Cañavate, F.J.F.; Fernández-Pacheco, D.G. (2017)
    Current hospital furniture market counts on numerous models of auxiliary tables, all of them oriented to cover a very specific need, overriding general hospital care. Furthermore, in the new “Internet of things” scenario, ...
    Thumbnail

    PREDICCIÓN MEDIANTE SIMULACIÓN DE LA VIDA A FATIGA EN COMPONENTES MECÁNICOS SOMETIDOS A VIBRACIONES ALEATORIAS: METODOLOGÍA Y PARÁMETROS A CONSIDERAR 

    Abad, Javier; Cuartero, Jesús; Malón, Hugo (2017)
    There are many areas of engineering in which the dimensioning of mechanical components must be carried out in the face of dynamic demands that vary over time. These variable stresses generate fatigue phenomena in the ...
    • 1
    • 2
    • 3
    • 4

    DSpace software copyright © 2002-2016  AEIPRO
    Contacto | Sugerencias
     

     

    Listar

    Todo AEIPROComunidades & ColeccionesPor fecha de publicaciónAutoresTítulosMaterias

    Mi cuenta

    Acceder

    Descubre

    AutorCuartero, Jesús (4)Cavas, F. (3)Cañavate, F.J.F. (3)Fernández-Pacheco, D.G. (3)Parras, D. (3)Capuz-Rizo, Salvador F. (2)Cerveró Meliá, Ernesto (2)Justel Lozano, Daniel (2)Labarta, Vicente (2)Malón, Hugo (2)... másMateria
    Ingeniería de Producto, Procesos y Diseño Industrial (32)
    ... másFecha
    2017 (32)
    Has File(s)Yes (32)

    DSpace software copyright © 2002-2016  AEIPRO
    Contacto | Sugerencias