Mostrar el registro sencillo del ítem

dc.contributor.authorAlfonso Cendón, Javier
dc.contributor.authorFernández Robles, Laura
dc.contributor.authorCastejón-Limas, Manuel
dc.contributor.authorGarcía López, Juan
dc.contributor.authorMedina, Gabriel
dc.date.accessioned2018-02-27T11:53:32Z
dc.date.available2018-02-27T11:53:32Z
dc.date.issued2016
dc.identifier.isbn978-84-617-4180-9
dc.identifier.urihttp://dspace.aeipro.com/xmlui/handle/123456789/934
dc.descriptionEl salto vertical es un test muy utilizado en el ámbito deportivo para evaluar la potencia o fuerza explosiva de las extremidades inferiores. Existen varias modalidades de salto vertical que se relacionan con el rendimiento deportivo en disciplinas donde la fuerza y potencia es importante, como el fútbol, el voleibol, etc. El objetivo de este proyecto ha sido desarrollar un prototipo software, que permita la construcción de dispositivos “Low Cost” para medir el salto vertical en el ámbito deportivo, mediante la utilización del acelerómetro integrado en SmartPhones tipo iPhone como dispositivo hardware para registrar el tiempo de vuelo y su posterior validación con métodos directos basados en "Integración de datos fuerza-tiempo". Para el cumplimiento de estos objetivos el proyecto se ha desarrollado utilizando metodologías basadas en el PMBOK (Project Management Body of Knowledge) del PMI (Project Management Institute) y en las guías de buenas prácticas de desarrollo de prototipos.es_ES
dc.description.abstractThe vertical jump is a test widely used in sports to evaluate the power or explosive strength of the lower extremities. There are several methods of vertical jump that relate to athletic performance in disciplines where strength and power is important, such as soccer, volleyball, etc. The objective of this project was to develop a software prototype that allows the construction of "Low Cost" devices for measuring vertical jump in sport by using the built in accelerometer SmartPhones as hardware device to record the flight time and subsequent validation with direct methods based on "Data Integration force-time". To fulfil these objectives, the project has been developed using techniques based on the PMBOK (Project Management Body of Knowledge) from PMI (Project Management Institute) and the guidelines of good practice of prototyping methodologies.es_ES
dc.language.isoeses_ES
dc.subjectTecnologías de la Información y las Comunicaciones. Ingeniería del Softwarees_ES
dc.titlePROTOTIPO SOFTWARE PARA LA CONSTRUCCIÓN DE DISPOSITIVOS “LOW COST” PARA MEDIR EL SALTO VERTICAL EN SMARTPHONESes_ES
dc.title.alternativeSOFTWARE PROTOTYPE FOR THE DEVELOPMENT OF "LOW COST" DEVICES FOR MEASURING VERTICAL JUMP IN SMARTPHONESes_ES
dc.typeArticlees_ES


Ficheros en el ítem

Thumbnail

Este ítem aparece en la(s) siguiente(s) colección(ones)

  • CIDIP 2016 (Cartagena) [210]
    XX Congreso Internacional de Dirección e Ingeniería de Proyectos (Cartagena 2016)

Mostrar el registro sencillo del ítem