Mostrar el registro sencillo del ítem

dc.contributor.authorRomero Sedó, Antonio Manuel
dc.contributor.authorArrué Burillo, Paloma
dc.contributor.authorRomero Miquel, Jordi Françesc
dc.contributor.authorPonz Carcelen, Román
dc.date.accessioned2020-09-29T17:12:43Z
dc.date.available2020-09-29T17:12:43Z
dc.date.issued2020
dc.identifier.isbn978-84-09-21128-9
dc.identifier.urihttp://dspace.aeipro.com/xmlui/handle/123456789/2449
dc.descriptionLa Universitat Politècnica de València trabaja juntamente con EMIMET a través de un convenio de investigación, cuyo objetivo es la realización del cálculo mecánico a colapso de nuevas conducciones enterradas para el abastecimiento de agua potable. El objetivo es determinar el espesor mínimo de las tuberías de acero que se van a instalar enterradas, así como las condiciones límite de trabajo y de servicio. Se estudia el comportamiento mecánico a colapso de las tuberías con y sin cargas de tráfico y en el interior de una vaina. Los cálculos se han realizado a través de modelación matemática por elementos finitos (MEF) y el cálculo de la presión crítica mediante las ecuaciones de la American Water Works Association. Los resultados obtenidos han sido los espesores mínimos de las tuberías.es_ES
dc.description.abstractThe Polytechnic University of Valencia works together with EMIMET through a research agreement, whose objective is to perform the mechanical calculation of new buried pipes collapsing for the supply of drinkable water. The objective is to determine the minimum thickness of the steel pipes to be installed buried, as well as the working and service limit conditions. The mechanical behaviour and collapse of pipes with and without traffic loads and inside a sheath is studied. The calculations have been made through mathematical finite element modeling (MEF) and the calculation of the critical pressure using the equations of the American Water Works Association. The results obtained have been the stresses, deformations, safety coefficients and minimum thicknesses of the pipes.es_ES
dc.language.isoeses_ES
dc.subject02- Ingeniería Civil, Urbanismo y Ordenación del Territorio. Construcción y Arquitecturaes_ES
dc.titleEstudio mecánico a colapso en grandes tuberías de abastecimiento de agua potablees_ES
dc.title.alternativeMechanical study to collapse in large potable water supply pipeses_ES
dc.typeArticlees_ES


Ficheros en el ítem

Thumbnail

Este ítem aparece en la(s) siguiente(s) colección(ones)

  • CIDIP 2020 (Alcoy) [175]
    XXIV Congreso Internacional de Dirección e Ingeniería de Proyectos (Alcoy, 2020)

Mostrar el registro sencillo del ítem